KitFor bricklayers
Scaffold for bricklayers, designed by one.
Lite-A-Scaffold was designed by a bricklayer. Standard frames give you deck room for bricks and a mortar board, and two people can have a bay up and working fast.
Start with the Bricklayer Starter Kit
Two bays of 1.5m frames on castors covers about 3.7m of wall. You get frames, braces, planks, guard rails and a ladder hatch, so it's a working platform out of the box. Need something different for your wall? Change it in the kit builder.
- 1.5m standard frames, 1312mm wide, for the most deck room
- Add a 1.0m step frame when you want the deck a bit higher
- Five planks per standard bay: a centre plank plus four
- Castors, so you roll it along the wall as the course goes up
Going above one lift
Standard frames stand freestanding to one lift, 2m to the platform. Above that, tie it to the building, butt it against a rigid wall, or run outriggers onto a hard surface or a plank. Any bay over 1.5m needs guard rails, mid rails and toe boards. See the height guide for the details.

Narrow frames for side walls
Narrow frames (812mm wide) fit side passages and between fences. They're Light duty, 200kg per working platform, and need extra stability measures at every height (see the height guide). Where you've got the room, use standard frames for the heavier loads.
Shop
The parts for the job.
Your set-up, already worked out.
Open the builder with this set-up loaded, then change the length and height to suit the wall.
Enquiries
Common questions.
Can't find what you're after? Give us a call — we're happy to talk it through.
Bricklayers, renderers, painters, builders and carpenters, mostly on house jobs. We also welcome reseller enquiries.
Let's go
Not sure what you need?
Tell us the job and we'll put the parts list together for you.
Get a parts list and a price
Tell us the job, we'll do the counting.
Follow along
Follow along on Instagram.
New stock, set-ups on site and container arrivals.





