KitFor builders & carpenters
Site scaffold for builders and carpenters.
For fascias, eaves, cladding and framing. Kits for a working platform or a two-storey set-up, with the rails and toe boards you need over 1.5m.
Pick your kit
Most jobs start with the Builder's Platform Kit. For taller work, the Two-Storey Kit stacks more lifts. Adjust either one in the kit builder, and add screw jacks if the ground isn't level.
- 2.0M A frames reach height in fewer lifts, with long (2.1m) braces
- Screw jacks level uneven ground, extended no more than 350mm
- Top and mid guard rails on all open sides
- Side and end toe boards on any bay over 1.5m
How far does your budget go?
Want to know what $5,000 buys for a step-frame set-up at 4m with handrails? It comes down to frames, bays and rails. Send the height, length and your budget through the enquiry basket and we'll put a list together and confirm the price. Prices include GST.

Tall set-ups need planning
Standard frames stand freestanding to one lift only, 2m to the platform. Past that, tie it to the building, butt it against a rigid wall, or run outriggers onto a hard surface or a plank. Anything over 4m to the top working platform must be put up by a ticketed scaffolder. See the height guide.
Shop
The parts for the job.
Your set-up, already worked out.
Open the builder with this set-up loaded, then change the length and height to suit the wall.
Enquiries
Common questions.
Can't find what you're after? Give us a call — we're happy to talk it through.
Over 4m to the top working platform, yes: a ticketed scaffolder must put it up. Under that, only competent persons should do it.
Let's go
Not sure what you need?
Tell us the job and we'll put the parts list together for you.
Get a parts list and a price
Tell us the job, we'll do the counting.
Follow along
Follow along on Instagram.
New stock, set-ups on site and container arrivals.






