Kit builder
Build your kit in under a minute.
Tell us the job and we'll list every part, priced. Add it all to your enquiry and we'll check it before anything's confirmed.
5% off applied on Lite-A-Scaffold gear. Add $2,066 more for 10% off.
Indicative total · 56 pieces
$2,787.30
Length of wall
bays of 1.83m
Your parts list
56 pieces
3×1.5M Standard A Frame
3 per lift × 1 lift
$435
4×2.1M Long Brace
2 per bay on each lift, one each side
$200
6×Joint Pin
One on each frame leg where lifts join, and under each rail post
$54
6×Safety Clip
1 per joint pin
$30
10×Metal Planks
5 per bay on the deck, plus a side toe board per bay
$750
1×Ladder Hatch · 1800mm
Climb through the deck (takes the place of 2 planks)
$155
6×Guard Rail Corner
On top of each frame leg at the top platform
$270
8×Guard Rail
Both long sides of each bay, top and mid rail
$280
4×End Guard Rail · 1310mm
Both ends, top and mid rail
$140
2×Side Mesh Toe Board
Toe board at each end
$110
6×8" Castor Wheel
2 under each frame
$510
5% off applied on Lite-A-Scaffold gear. Add $2,066 more for 10% off.
This list is a starting point worked out from the Lite-A-Scaffold erection guide. We check every order before it's confirmed. Always assemble and use the scaffold as instructed, and a ticketed scaffolder is required for any scaffold over 4m to the top platform.
Enquiries
Before you build.
Can't find what you're after? Give us a call — we're happy to talk it through.
Yes. Lite-A-Scaffold is certified by SafeWork NSW and meets the Australian standards for scaffolding and access equipment, AS/NZS 1576 and AS/NZS 1577. Always put it up and use it as our set-up guide shows.
Follow along
Follow along on Instagram.
New stock, set-ups on site and container arrivals.

