
Guide
How high can you go, and what does it need?
How lifts add up to platform height, when you need guard rails and toe boards, and when you need extra stability measures or a ticketed scaffolder.
How lifts add up
Each lift is one frame high. Stack lifts with joint pins and brace both sides of every frame. Add up your frame heights for a rough platform height, then allow for how far the jacks are out.
- 2.0M A frame: 1994mm high
- 1.5M frames (standard, step, narrow): 1494mm high
- 1M step frame: 994mm high
- Every lift needs its own bracing on both sides
Guard rails, mid rails and toe boards over 1.5m
You need them on any bay more than 1.5m above the surrounding ground, and that includes while you're building it. Fit top and mid rails on every open side, and toe boards along the edges of the deck.
Standard frames: one lift freestanding
The 2.0M A frame, 1.5M standard A frame and 1.5M step frame stand freestanding to one lift, 2m to the platform, with screw jacks out no more than 350mm. Above one lift, they need extra stability measures.
Narrow frames: extra measures at every height
Narrow frames (812mm wide) need extra stability measures from the first lift up. They're also Light duty: 200kg of people and materials per working platform.
Your options for extra stability
Use one of these to stop a scaffold toppling:
- Tie it to a permanent structure, such as the building
- Butt scaffold tubes against a rigid wall
- Run outriggers onto a hard surface such as concrete
- No hard surface? The outrigger must push onto a plank resting firmly on the ground
When you need a ticketed scaffolder
Any scaffold over 4m to the top working platform must be put up by a qualified (ticketed) scaffolder. Under that, only competent persons should put it up. Also check the lifts permitted: 6 for the 2.0M A frame and 7 for the other frames.
Not sure what height you need?
Send us your wall height and length through the enquiry basket, or build a list in the kit builder, and we'll check the frames and kit with you before anything is confirmed.
Shop
The parts for the job.
Enquiries
Common questions.
Can't find what you're after? Give us a call — we're happy to talk it through.
One lift, 2m to the platform, on standard-width frames with jacks out no more than 350mm. Higher than that, or on narrow frames at any height, you need ties to the building, a rigid wall to butt against, or outriggers. See the height guide.
Let's go
Not sure what you need?
Tell us the job and we'll put the parts list together for you.
Get a parts list and a price
Tell us the job, we'll do the counting.
Follow along
Follow along on Instagram.
New stock, set-ups on site and container arrivals.




